Because it may be intimidating that you make some errors in the process of tiling, many people prefer to not learn how to do it. However, it really is much easier than what many might think. Rather than hiring a specialist for the job, it will save you a whole lot of money. This task is a no-brainer for you so long as you know the do’s and don’ts.
Choosing Your Tiles
To begin , you need to choose the tiles you want to utilize. You might get shocked with all the diversity of choices when doing this. There are various kinds of tiles and they come in different finishes, textures, sizes and colors.
Depending on your choice, choosing a tile requires a good information on them. It can also depend on how you want the room to be as well as the over-all design and feel of the room.
Computations and Measurements
You also have to measure out your floor area. Whether you need the tiles to go under any type of fitting and units is also extremely important to take into account. Generally, it is better if you tile under the fittings, so that when you would have to move appliances later on, like a fridge, you then don’t have to lift it up over the edge of your new tiles.
Tiles – You Need To Choose The Tiles
You need to do some calculations when you have chosen what sort of tile you need to use. You have to get your floor’s width and divide it by the width of one tile. This is to know the number of complete rows that you’ll have. It will help you in choosing the optimal wall edge to put your cut tiles against.
Now you can begin applying tiles on your floor after doing the math. Making sure that you have an even coverage of glue put on your sub-floor is also extremely important. Your sub-floor or the surface you are tiling is another factor in which adhesive to utilize. If it is a concrete floor, then you can use a rapid setting adhesive. Because it can set as quickly as 30 minutes, ensure that you don’t spread too much of the mixture at once.
If it is a wooden sub-floor, you’ll need a flexible adhesive. It is written on the bag or the tub if the adhesive is flexible or not. You will need a white adhesive if you have marble. This is so that no color coming from the underside would bleed and ruin your design.
You would need to grout the floor once you finished repairing your tiles on the floor and once you’ve allowed enough time for it to dry. When you have natural tiles, like marble, slate, limestone, granite, travertine, and porcelain, you should seal them first before you grout them. You have to use a specialized impregnating sealer so that they will be waterproof and can be more resistant to dirt and staining.
Apply the groute using a grout squeegee after mixing it up. Until they are all filled, work over the joints.
Wipe off the excess grout utilizing a sponge to finish it.