Sydney Tiles Facebook Sydney Tiles Twitter Sydney Tiles Instagram Sydney Tiles Youtube Sydney Tiles Facebook
 

Drilling Porcelain Tiles – The How To Guide

Drilling Porcelain TilesDo you want to understand how is drilling porcelain tiles done? This short article will aid you by providing easy steps that are crucial in your drilling pursuit. Drilling porcelain tiles could be needed when you need to set up fixtures in your bathroom or virtually any room that features porcelain tiles. To illustrate, by drilling the porcelain tiles, you will be equipped to put bathroom shaving cabinet, a mirror, soap dish, towel rails, or maybe your cosmetics holder.

Drilling Porcelain Tiles – The How To Guide

To begin your drilling activity, you must first determine what kind of materials you should have in order to do the activity. Here are the equipments you need:

RCD Breaker

Drill Bits of Diamond Core (Premium Quality)

Masonry Drill Bits (Included w/ quality drill bits)

Drill Bit of Carbide Pilot ( you can use this when you drill 13-mm hole or bigger holes)

Equipment for Water Cooling

Drilling Device

Safety Glasses or Goggles

These materials can be bought in various stores. You could just simply purchase these before proceeding to your drilling activity. You ought to make sure of the grade of the instruments first to ensure the output of the drilling would be appropriate for your need.

Another thing you should think about with drilling porcelain tiles is the hole sizes you’re going to create. It is fairly important for the size or diameter of the hole will determine how large the drill bit you’re going to use.

After establishing the diameter of the holes you’re going to drill and preparing the tools you will need for the drilling, you can begin to proceed drilling porcelain tiles. Make sure you sport your safety goggles to keep your eye clear of particles not to mention prevention of electric shock with RCD.

These proceeding steps would be for holes about 10mm or less in diameter using diamond cores.

1. Put an indicator in the hole’s center. Either utilize a sticky tape or perhaps lead pencil.

2. Grab the appropriate size of the diamond core bit. After that, affix it to the electric drill. Make sure that there’s a supply of water from any cooling equipment is at a constant. (Water cooling devices are important in keeping it sure that there is a constant cool temperature in the diamond core bit and this will prevent debris while you are drilling the hole. Stay away from mobile aspirator or wet sponge, for these do not give sufficient coolant to the diamond core bit.)

3. Your drill should be positioned between 1000 & 1500 rpm. Choosing the marker as your marking tool, it is ideal to use the “Leaning In” method.

*Method of Leaning In- With an angle, you will begin to drill. As you see the drill cuts the tile, your drill has to be in horizontal position. Ensure there is adequate pressure given and rotate the drill until the hole is completely drilled.

*Method using Sticky tape- Place sticky tape on the wall exactly where you want the hole. This’ll help to stop the drill bit from slipping.

4. Tip- I took a great from www.tfo.com.au. As soon as the hole has started, don’t use a lot of pressure allow the drill carry out the work.

0 comments… add one

Leave a Comment